coLinux + ArchLinux

最近做Flash，不得不长期在Windows下面跑。然而突然想用一些Linux下面的工具，就会很不爽。 Cygwin其实还不错，但是感觉只是概念上模拟了一个环境，本质还都是exe。

coLinux是一个Linux内核的Windows port，使得可以在Windows下跑Linux。理论上是支持直接启动本机硬盘的Linux的，比如双启动的情况，但是我这里配了很久没有成功，可能是因为我把boot单独分区，以及root分区是xfs格式有关。

于是想找个小巧的linux镜像，就看到了ArchLinux，用了用，确实不错。非常快。

再用一段时间看看吧，这确实是一个很有创意的搭配。

Comments

Determine Perspective Lines With Off-page Vanishing Point

In perspective drawing, a vanishing point represents a group of parallel lines, in other words, a direction. For any point on the paper, if we want a line towards the same direction (in the 3d space), we simply draw a line through it and the vanishing point. But sometimes the vanishing point is too far away, such that it is outside the paper/canvas. In this example, we have a point P and two perspective lines L1 and L2. The vanishing point VP is naturally the intersection of L1 and L2. The task is to draw a line through P and VP, without having VP on the paper. I am aware of a few traditional solutions: 1. Use extra pieces of paper such that we can extend L1 and L2 until we see VP. 2. Draw everything in a smaller scale, such that we can see both P and VP on the paper. Draw the line and scale everything back. 3. Draw a perspective grid using the Brewer Method. #1 and #2 might be quite practical. #3 may not guarantee a solution, unless we can measure distances/p...

Hardware Password Manager

[Updates 2025-01-20] The original blog post assumes that all passwords are stored in one password manager, and the password manager either unlocks everything or nothing (e.g. Keepass). After discussing with friends, I realized that if I use something like pass , and I use a hardware GPG token, I can actually store and sync all encrypted passwords to all devices, because I will only decrypt the passwords on demand, and the computer will not see the GPG private key. The compromise is that the computer will see the list of all password entries (e.g. accounts), as well as a few other issues . I've been using Keepass for many years. I don't use online password services because I cannot fully trust them. Besides, I may not always have Internet connection, which is why I also don't use a self-hosted service. Everything has been working fine, until I turn my paranoid knob to the max. Here's the thought experiment . The Imaginary Scenario Let's say I have 100 PCs for differe...

Installing Linux on Surface Pro 1g

Windows 10 will soon reach its end of life, and my 1-gen Surface Pro is not supported by Windows 11. I (finally) decided to install Linux to it. Fortunately, it's a not-so-easy nice adventure: The device has only one USB port, so I have to bring back my 10+-year old USB hub. My live USB drive cannot boot directly, I have to disable Secure Boot first, by holding Volume Up during boot. I think years ago I learned that booting on USB might not work through a USB hub, but fortunatelly it worked well with my setup. This is done by holding Volume Down during boot. Wifi adapter was detected in the live Linux environment, but not functional. And I don't have a USB-Ethernet adapter. Luckily, nowadays we have USB-tethering from Android phones, which works out-of-the-box. Originally I planned to following this guide to set up root on ZFS, however, the system froze when building the ZFS kernel module. Then I decided to just use EXT4, yet I still learned a lot from the guide about disk par...

WangLu's Notes

Search This Blog