Skip to main content

Ubuntu 下 mount windows 共享目录

一般来说遇到标题所述问题我马上会想到smbfs,不过好久不用,最近发现smbfs已经没有了,取而代之的是cifs,于是命令大约是

sudo mount -t cifs //hostname//folder /localfolder -o user=username

不过总是报 Input/ouput error

google了一阵,有的说加上sec=ntlm有的说加iocharset=utf8,不过都没用。其中加了后者还会出 Can not access a needed shared library 的错误。根据 http://wiki.openwrt.org/doc/howto/cifs.client   和 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1067681, 安装了linux-image-extra-***的包以后才可以,但是mount还是不行。(我的linux是在虚拟器,装的最小内核linux-virtual)

于是尝试了一下smbclient,也是报错:tree connect failed: NT_STATUS_INSUFF_SERVER_RESOURCES 根据 http://klebom.net/melazy/tricks/ 查到是IRPStackSize过小的问题, 我在windows也确实查到了事件:
Log Name:      System
Source:        srv
Date:          2013-10-20 14:08:29
Event ID:      2011
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
The server's configuration parameter "irpstacksize" is too small for the server to use a local device.  Please increase the value of this parameter.

于是查到需要改注册表
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters\IRPStackSize

这是个DWORD值,根据http://support.microsoft.com/kb/285089说其默认值是15,可取范围是11-50。之前那个链接说改成了17,18才可以,但我一直尝试到20都不行,于是一口气改成32才可以。

但愿没有后遗症。具体原因仍不明,不知道是否跟在跑linux虚拟机有关。

Comments

Popular posts from this blog

Determine Perspective Lines With Off-page Vanishing Point

In perspective drawing, a vanishing point represents a group of parallel lines, in other words, a direction. For any point on the paper, if we want a line towards the same direction (in the 3d space), we simply draw a line through it and the vanishing point. But sometimes the vanishing point is too far away, such that it is outside the paper/canvas. In this example, we have a point P and two perspective lines L1 and L2. The vanishing point VP is naturally the intersection of L1 and L2. The task is to draw a line through P and VP, without having VP on the paper. I am aware of a few traditional solutions: 1. Use extra pieces of paper such that we can extend L1 and L2 until we see VP. 2. Draw everything in a smaller scale, such that we can see both P and VP on the paper. Draw the line and scale everything back. 3. Draw a perspective grid using the Brewer Method. #1 and #2 might be quite practical. #3 may not guarantee a solution, unless we can measure distances/p...

Installing Linux on Surface Pro 1g

Windows 10 will soon reach its end of life, and my 1-gen Surface Pro is not supported by Windows 11. I (finally) decided to install Linux to it. Fortunately, it's a not-so-easy nice adventure: The device has only one USB port, so I have to bring back my 10+-year old USB hub. My live USB drive cannot boot directly, I have to disable Secure Boot first, by holding Volume Up during boot. I think years ago I learned that booting on USB might not work through a USB hub, but fortunatelly it worked well with my setup. This is done by holding Volume Down during boot. Wifi adapter was detected in the live Linux environment, but not functional. And I don't have a USB-Ethernet adapter. Luckily, nowadays we have USB-tethering from Android phones, which works out-of-the-box. Originally I planned to following this guide to set up root on ZFS, however, the system froze when building the ZFS kernel module. Then I decided to just use EXT4, yet I still learned a lot from the guide about disk par...

Fix Google Security Code

Google Security Code (http://g.co/sc) is one type of 2-step verification. This is particularly useful when security keys and passkeys are not available. I have been using it in my LXC containers, until today I found out that it stopped working. It just kept saying "The code is invalid". It is easy to rule out some factors: The code works on other browsers on my laptop. The code works on other devices that are directly connected to the router. So it appears that Google also checks IP addresses besides the security code. Recently I have IPv6 enabled, so most devices that are directly connected to the router have both IPv4 and IPv6 addresses. But  I only enabled IPv4 for my LXC containers. So I guess when a code is generated by device A and used by device B, Google should be able to check that device A and device B are closely located. But in my case, IPv6 address appears on device A but not on device B, which may look suspicious. To fix the problem, I just needed to disable IPv...