Windows Vista 更改启动驱动器SATA模式后出现 STOP 0x0000007B INACCESSABLE_BOOT

Windows Vista 更改启动驱动器SATA模式后出现 STOP 0x0000007B INACCESSABLE_BOOT_DEVICE 的解决

参见: http://support.microsoft.com/kb/922976/zh-cn

最近把硬盘sata模式改成了ahci，linux下没什么问题，但是进vista后就出现上面的错误信息。

产生原因大概是安装Vista时使用的IDE模式，因此Vista安装后没有开启ahci服务。

根据上面的链接，解决方法为，先用IDE模式启动，修改注册表

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci

把Start键值改为0

然后重启，再改成ahci就行了。

Comments

Determine Perspective Lines With Off-page Vanishing Point

In perspective drawing, a vanishing point represents a group of parallel lines, in other words, a direction. For any point on the paper, if we want a line towards the same direction (in the 3d space), we simply draw a line through it and the vanishing point. But sometimes the vanishing point is too far away, such that it is outside the paper/canvas. In this example, we have a point P and two perspective lines L1 and L2. The vanishing point VP is naturally the intersection of L1 and L2. The task is to draw a line through P and VP, without having VP on the paper. I am aware of a few traditional solutions: 1. Use extra pieces of paper such that we can extend L1 and L2 until we see VP. 2. Draw everything in a smaller scale, such that we can see both P and VP on the paper. Draw the line and scale everything back. 3. Draw a perspective grid using the Brewer Method. #1 and #2 might be quite practical. #3 may not guarantee a solution, unless we can measure distances/p...

Hardware Password Manager

[Updates 2025-01-20] The original blog post assumes that all passwords are stored in one password manager, and the password manager either unlocks everything or nothing (e.g. Keepass). After discussing with friends, I realized that if I use something like pass , and I use a hardware GPG token, I can actually store and sync all encrypted passwords to all devices, because I will only decrypt the passwords on demand, and the computer will not see the GPG private key. The compromise is that the computer will see the list of all password entries (e.g. accounts), as well as a few other issues . I've been using Keepass for many years. I don't use online password services because I cannot fully trust them. Besides, I may not always have Internet connection, which is why I also don't use a self-hosted service. Everything has been working fine, until I turn my paranoid knob to the max. Here's the thought experiment . The Imaginary Scenario Let's say I have 100 PCs for differe...

Installing Linux on Surface Pro 1g

Windows 10 will soon reach its end of life, and my 1-gen Surface Pro is not supported by Windows 11. I (finally) decided to install Linux to it. Fortunately, it's a not-so-easy nice adventure: The device has only one USB port, so I have to bring back my 10+-year old USB hub. My live USB drive cannot boot directly, I have to disable Secure Boot first, by holding Volume Up during boot. I think years ago I learned that booting on USB might not work through a USB hub, but fortunatelly it worked well with my setup. This is done by holding Volume Down during boot. Wifi adapter was detected in the live Linux environment, but not functional. And I don't have a USB-Ethernet adapter. Luckily, nowadays we have USB-tethering from Android phones, which works out-of-the-box. Originally I planned to following this guide to set up root on ZFS, however, the system froze when building the ZFS kernel module. Then I decided to just use EXT4, yet I still learned a lot from the guide about disk par...

WangLu's Notes

Search This Blog