Skip to main content

Posts

Windows Vista 更改启动驱动器SATA模式后出现 STOP 0x0000007B INACCESSABLE_BOOT_DEVICE 的解决

参见: http://support.microsoft.com/kb/922976/zh-cn 最近把硬盘sata模式改成了ahci,linux下没什么问题,但是进vista后就出现上面的错误信息。 产生原因大概是安装Vista时使用的IDE模式,因此Vista安装后没有开启ahci服务。 根据上面的链接,解决方法为,先用IDE模式启动,修改注册表 HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci 把Start键值改为0 然后重启,再改成ahci就行了。

热烈祝贺访问量首次突破50

虽然我的blog的初衷只是为了整理自己的笔记方面日后查找,并不是为了给别人看,但是看到能帮助别人也确实感到很高兴。 根据Google Analytics的数据,2008.04.22日访问量为57,创历史新高,且首次突破50。 主要原因还是最近Blogspot解封了,要不我就得庆祝突破20了。

有关 64位Linux 驱动 Atheros 5007EG 无线网卡

[2008-10-03 更新]ubuntu 8.10中新增了acer_wmi模块,可以完美驱动无线网卡了 :) 系统是 Ubuntu 8.04 rc amd64,笔记本是Acer Aspire 4520 无线网卡现在看来是 Atheros 5007EG, 为什么这么说呢,我主要依靠lspci判断,最早识别不出来,后来能认出Atheros,但是没型号。然后一段时间内都认成5006EG。当时也是按它装的驱动。但是最近update pciid后又认成了AR242x。 在 http://madwifi.org/wiki/Compatibility/Atheros 上是这么说的 Atheros AR5007EG ¶ Chipset: AR2425 / AR5007EG URL: http://atheros.com/pt/AR5007EG.htm Supports: 802.11b 802.11g Interface: PCI-Express x1 Device Information: Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01),Subsystem: AMBIT Microsystem Corp. Unknown device 3065 Notes: not supported by HAL as of 2007.04.28 - resturns Hal status 13 Notes: Suported by ndiswrapper with windows driver, but some user reports crash problems Notes: Instructions about how to use the windows driver + ndiswrapper Notes: works fine with ndiswrapper, using old drivers, search ubuntu forums Notes: Sometimes erroneously reported as an AR5006EG by lspci Notes: Works perfectly with latest madwifi...